Hundreds of Hours of Labor

Carrozzeria Touring Berlinetta

Carrozzeria Touring Berlinetta

Ferrari Headlight detail

Ferrari Headlight detail

Touring Carrozzeria Body Dashboard

Touring Carrozzeria Body Dashboard

High Build Primer Ferrari

High Build Primer Ferrari

Here are a series of photos of the block sanding process on the Ferrari 166 Touring Berlinetta. The sheet metal is all sorted and gaps are perfect but the body needs hundreds of hours of serious elbow grease (sanding) to make sure it is all straight as an arrow. Syl isn’t scared of the “mud”, he completely fills in all of the door and hood gaps allowing him to block sand right across them so when the light hits the highly polished top coat you won’t see any waves or change in reflection.

Even though the grill we made fit the opening in bare aluminum, Syl spends hours making it perfect with skim coats of body filler and attacks the headlight rim contact areas with the same level of perfection. There isn’t any room for error when working with super fine trim that is used all over this car like the delicate headlight rings and the low profile windshield and rear glass surrounds. Imagine these surrounds,  start with a long  section of 1/4″ aluminum rod and whittle it down so only a quarter of it is used.  We re-made this trim because the delicate original material was destroyed when the car was disassembled.

Right now, the car is sealed up in high build primer with a blue tinted epoxy primer that seals the polyester filler from moisture and greasy finger prints. Now we have some more fitting here and there before it goes back to Syl’s shop to work out some more details such as the incredibly complex belt-line crown that goes from the headlight to the tail light..

We’ll probably have more hours in sanding and painting the dashboard that it would take to paint an entire late model car like a Mercedes or Honda. The dash on this car is a thing of beauty but it requires a perfectionist sicko to finish it because like the rest of the car, the trim that surrounds the gauges and switches are like string bikinis

Tweet This!

2 Comments »

  1. Lawrence Petty said,

    April 2, 2013 @ 5:47 pm

    Was wonder the paint name and code for the “mature” red on this unit?

  2. admin said,

    April 15, 2013 @ 10:34 am

    Dear Lawerence.

    The paint does not have a color name but I do have the PPG Color formula, its in the “DCC” “Concept” single stage line. Email me at rpm@rpmvt.com to get that information

Leave a Comment