We often pick on people who say “all you gotta do is”, because there’s no such thing as “all you gotta do is”…. Anyone who says “all you gotta do is” either has never done it before or is trying to beat you up on an estimate. AKA, a looser

Most of the cars we work on have brand new brake components available to purchase which allow us to slam ‘em in and ship it. Unfortunately, we have to rebuild brake components on Ferrari’s which really sucks.  All you gotta do is…  Ugh. A guy sent me a totally blown out Master cylinder for a 330 GTC, rusted and stuck, terrible, horrible, so I sent steel fittings off to be cadmium plated, sent the cylinder to have a new sleeve installed in the bore, ordered an overhaul kit and when everything returned, I put it all back together. After assembling it the I noticed that the pistons were sticking in the cylinder so I took it all apart and the wrenches scratched the fresh plating and watched as the brake fluid stripped the black paint. I honed the bore and got the pistons to move freely, assembled it again and set it up to be tested on my high tech device that you can observe in the photo below. Now I am finding that the sleeve wasn’t drilled correctly and fluid couldn’t  into the forward chamber (that goes to the rear brakes) so I had to start all over again, scratching, chipping. Now, the cylinder is all back together and working perfectly after 7 hours of labor! “All you gotta do is”! Did I mention that the rebuild kit didn’t come with the correct first seal, there was a 30mm seal included when I needed a 25mm seal so after buying 3 kits, I resorted to making my own seal.

Ferrari GTC Brake Master Cylinder

Last week I visited a friend and drove this amazing 1971 Ferrari 356 GTB/4 Daytona around town and was blown away at how nicely it performed. The odometer shows around 20,000 miles and based on the overall condition of the number of original components, I believe it. Since the car has had one conscientious owner for over 30 years it has a complete handbook set and full tool roll and has been serviced to make sure its in top condition at all times. Most Daytona’s are missing the original Magnetti-Marelli ignition boxes or Digi-Plex units but this car has them fitted on the front wheel arches in the engine bay.  My friend is selling the car so if you are interested let me know and I can make arrangements to have available for viewing.

Daytona

Not sure who owns these cars but they are the ones that were transported in the FIAT truck in the Ferrari team livery. The cars are in excellent condition mechanically but they are appropriately rough on the outside, a refreshing change to the glossy perfection that you typically see at the Cavallino. The Daytona that you see here was racing against a Michelotto 308 GTB on Friday for one of the best Vintage Ferrari races I have ever seen.

Ferrari Race cars

Here is the third and final car on the chassis dyno. An early production Daytona.

Power specs here!

After doing all kinds of work on a 1967 Ferrari 330 GTC we are now going through the transmission. We overhauled the engine last fall and after our customer spent the spring and early summer driving the car he realized that the synchronizers were too worn for him to enjoy driving the car.

We are going to replace the bearings at the front of the transmission but all of the other bearings look great. All 5 synchronizer bands have been replaced even though the second and third gear synchros were the worst.

These transmissions are straightforward to work on provided you do not have to deal with the spacing on the pinion shaft.