1966 Ferrari 330

Rosso Rubino 330 GTC

With so many people interested in this car, I decided to get it to the shop so it can be thoroughly marketed. In a few days it’ll be on the website and advertised in a few publications.

We also make the evaporator housing which holds a very dense core and squirrel cage fan. The original housing is made from steel but we make it from aluminum since it’s so much easier to work with and the part has a bunch of bends and needs huge holes drilled in the sides.  Since the part is buried under the dash, no one will ever know the difference especially if we give it a coat of light gold paint.

I have all the other parts coming in soon like the condenser, the compressor, drier bottle and all the fittings to complete the kit. It’s such a huge collection of parts and I have lots of stuff in stock but there is always one things that is missing. When its all together I will take a photo of the complete set up. I have a higher amperage alternator to send off with this kit, it’s an 80 amp unit from a 365 GT 2+2 but the 330′s with A/C originally came with Lucas 60 amp alternators

A/C System 330 GTC Evaporator

Ferrari Air Conditioning system

Housing for A/C Evaporator

I cut away the rocker panels and cut the inner structure from behind the rear fender arches so I can properly fix and seal the panels so they’ll last at least another 45 years. Water can get into the rocker panel area but there are many areas for it to leak out but there were these big sand bricks trapped inside which allowed the water to linger in there for a long time which caused the most damage. As bad as it looks, there won’t be any major re-construction other than a few new inner sill struts and new rocker panels.

Refinishing a Ferrari 330 GTC

Rocker panel Ferrari

Nice looking GTC in blue

I was organizing my photo program a few days ago and found this photo of a nice looking GTC to share with you.
We had 3 dark blue GTC’s at this time and I think this car was sold to a guy in Switzerland.

Trim on GTC Ferrari

Ferrari Pininfarina detail

Brass welding and fitting

Another area that bothers me on the most of the Ferrari GTC’s that I have seen is the fit of the center console at the shifter opening. Like the other cars I have looked at, the shifter isn’t centered in the opening so naturally, I have to adjust this area too. This GTC used to have an odd reverse lockout tab like some of the 60′s race cars, but it didn’t fit so someone bent up the sheet metal in the opening on the left side of the opening.

GTC Interior

Now it fits properly

GTC for Sale 330

Here is a Super nice 330 GTC that a customer of ours is interested in selling. We’ve gone through all of the mechanical components within the last two years such as the engine, transmission and numerous other details. This car is outstanding and is ready to light ‘em up for 2012!

Re-finish Ferrari 330

It doesn’t look bad in this photo but the paint on this 330 GTC is displaying it’s age with small cracking, a few minor rust bubbles and areas where its flaking right off the sheet metal! I was looking carefully for signs of the original color which appears to have been blue from new. There is a hint of red paint around the front window but I can’t tell if the car was red at one time or if it was just some extra protective coating in an area that needs lots of rust protection. The car will likely be re-painted a dark blue.

330 GTC in for Paint

Mostly Porsche's and Ferraris

A group of three approaches the top of the pass.

We have a very close relationship with Rich and Jean Taylor at Vintage Rallies, and I wanted to create a video to promote and build their events. So, earlier this summer we gathered some favorite customers and friends together for a spectacular day of enthusiastic driving on wonderful back roads. We closed down the shop, and Nate, Casey, Peter and I were actually able to enjoy the cars we work so hard on.

We made sure that every car had a camera and a co-driver to run it. The result, a brief, but fun piece that shows just beginning of some of the capabilities that these cars possess. Video after the jump (click here).In case you thought that classic cars aren’t capable of being driven aggressively, have a look at this video.

Something about the rear of the car, the “C” pillar area above the rear wheel looks so great, so clean and pure. How can you argue with Italian design!

Ferrari 330 GT Blue