Blue Sera BB

Ferrari 512BB Blue

The new Canon G10 is working out well as you can see from these photos. Admittedly, part of the reason they’re so sharp is because I shot them at the end of the day with that mystical diffused light coming through high clouds which eliminates the major dark and bright patches on the car. Bill gave me some tips on standing way back and using the zoom to fill the lens with the car which gives the image such better depth. This camera has been great. Keep an eye out for more amazing displays of photography in this blog!

Mostly Porsche's and Ferraris

A group of three approaches the top of the pass.

We have a very close relationship with Rich and Jean Taylor at Vintage Rallies, and I wanted to create a video to promote and build their events. So, earlier this summer we gathered some favorite customers and friends together for a spectacular day of enthusiastic driving on wonderful back roads. We closed down the shop, and Nate, Casey, Peter and I were actually able to enjoy the cars we work so hard on.

We made sure that every car had a camera and a co-driver to run it. The result, a brief, but fun piece that shows just beginning of some of the capabilities that these cars possess. Video after the jump (click here).In case you thought that classic cars aren’t capable of being driven aggressively, have a look at this video.

A Ferrari Bonaldi Brake Booster for rebuild will only stop you in your tracks in it’s current condition – not working – but in very nice cosmetic shape.

A rare Ferrari 275 GTB and GTB/4 Egg-Crate Grille Brandoli reproduction isn’t easy to come by and is in good condition.

Marchall 660 Fog Lights for Ferrari 250, 225, 212, 166 will actually look at home on a variety of other cars including Porsche 356, Mercedes 300, etc.

We dynoed this blue 512BB last summer, and I cannot remember the exact figures. But, I do remember the incredible torque curve and how it made the maximum HP and torque at 5000RPM then plateaued out. I think it made just under 300HP at the rear wheels. We are going to be overhauling and enhancing this engine soon and it will be cool to put it back on the dyno to see the new numbers.

Here’s a link to a similar 512BB on the dyno this winter – this time in red. http://www.ferraricraft.com/2010/01/video-1984-ferrari-512-bbi-at-the-dyno/

The answer lies in a technicality. The moniker “boxer” refers to the piston timing of an engine, rather than the direction the cylinders point. On the Ferrari 512, the crankshaft isn’t a true boxer crankshaft – it is a V-12 crankshaft with the cylinders laid flat. Here’s why:

True boxers have one crankpin controlling only one piston/cylinder, and 180° engines share crankpins.

A true “boxer” (horizontally opposed engine) has corresponding pistons reaching top dead center simultaneously.

A 180° V-12 engine has piston pairs sharing a crank pin on the crankshaft and reaching top dead center half a crankshaft revolution apart. Most flat 12s are actually 180° V engines, including the Ferrari discussed here and the famous Porsche 917 racecar.

Interestingly, phase has always been of great concern to the motorcycle industry (think big bang configuration) as it directly effects vibration and riders sit right on top of it. Read more here.

Here is a slightly staged photo of a spectacular casting that like so many castings by Ferrari is both beautiful and a marvel of engineering. The forethought that went into making this to work as a transmission casting, differential housing, oil sump  as well as the surface to carry the engine is remarkable. It also carries internal porting for the scavenge and pressure side of the dry-sump oiling system for the engine. Since the transmission has its own oil pump, there is porting for pressurized oil system to lubricate the gears and bearings.  Ferrari spent so much time engineering this sort of part while selling so few cars that it seems that they should have been even more expensive to purchase when new.

I hope you can enjoy these photo. By the way, this part is huge, you could fit about 5 cats inside it.

Transaxle housing for Ferrari 512BB

Transaxle Casting Ferrari

He wanted me to get him the acid etched part numbers on the gears to determine if they were shaved or ground gears but I said, “who cares if they are shaved or ground, I want a matched set of ground”.  Leave it to Ferrari to have even thought shaved gears would hold up to the torque that these parts need to withstand. By the way, if the odometer and the condition of this car is correct, there are less than 10,000 miles on this transmission! Great stuff! I could not find any acid etch numbers to confirm that the gears were shaved but I am sure that they were and not the higher quality ground gears.

As you can see in the photos, the smaller gear has many pits from metal fatigue, not from abuse or lack of lubrication, just poor quality materials and process. What a bummer.   Geof just located gears from a Testarossa transmission that cost a prohibitave amount of money but at least this transmission will not be apart for months and months while we wait for gears to be re-made!

Ferrari Boxer transmission repair